Basic Info.
Application
Light Industry
Material
Monocrystalline Silicon
Transport Package
Wooden Case & Carton Box
Specification
200kgs/ 0.85CBM
Product Description
STL-600W Wind & Solar Hybrid Street Lighting Project System
(400W wind+ 200W solar)
I . System application and composition list
1.1 Application scope : This system is power by one 400W wind turbine plus 2pcs 100W mono-crystalline solar panels, which is suitable application for street lighting project in urban road, rural roads, scenic roads, highways, viaducts, and private gardens, courtyard etc.1.2 System composition List| No. | Items | Description | Quantity |
| 01 | FD-400W Turbine Head | 400W Permanent Magnet Generator
Tail-Rudder, Cable Accessories ,Hub
Low wind blades (Material: carboform)
Steel Flange & bolts and nuts | 1 set |
| 02 | Wind & Solar Hybrid Controller | Charge voltage : 24Vdc | 1 set |
| 03 | 100W Solar Panels | Rated Voltage : 24Vdc
100W polycrystalline silicon solar panel (UL standards) | 1 set |
| 04 | Timer Switch | For controlling lighting time (CE standards) | 1 Pc |
| 05 | Super cycle Gel Batteries | 12V-100AH Deep Circle Gel Batteries (CE standards) | 2pcs |
| 06 | LED light (1 pcs) | 56W-24Vdc (CE standards) | 1pc |
| 07 | Free Standing Tower(10m) | 10M poles x 2 , through hot galvanized processed and painted | 1unit |
| No. | Items | Description |
| 01 | Total Power | Total 600w (400w wind + 200w solar) |
| 02 | System voltage | 24Vdc |
| 03 | LED lamp | 56W-60W |
| 04 | Suitable tower height | 6-10m |
| 05 | Standard lighting time | 12 hours |
| 06 | Continue working days no wind no solar | 4 days |
| System | |
| Type: Single Phase | Off-Grid System |
| Configuration Diameter | Horizontal Axis |
| Rotor Diameter: | 1.7m |
| Location Relative To Tower | Upwind |
| Rated wind speed | 400rpm |
| Yaw system | By Tail, Free, Passive |
| | |
| Performance Parameter | |
| Rated Electrical Power | 400Watts @ 7m/s |
| Cut-in wind speed | 3m/s |
| Cut-out wind speed | 13m/s |
| Shut-down (high wind) | 16m/s |
| Security wind speed | 50m/s |
| Calculated Annual Output | 1150khw@above 5m/s |
| | |
| Blades | |
| Length | 0.85m |
| Material | Carboform |
| Blades weight | 5.3kgs |
| | |
| Generator | |
| Type | 3phase/ PMG |
| Frequency | 50Hz |
| Voltage | 3phase@50Hz, 0-300Vac |
| Rated Power output | 400 Watts |
| Maximum power output | 500 Watts |
| Insulation | Class F |
| | |
| Hybrid Controller Box | |
| Input voltage from generator | 0-60Vac |
| Charge voltage | 24VDC |
Battery Marching Quantity
Charge Current | 2Pcs x 12V-150AH Batteries
18A |
| Mechanical Parameters |
| Solar Cells | 36pcs (4*9)Mono-crystalline silicon solar cells 125mm*125mm |
| Front Cover | 3.2mm thick, tempered glass |
| Back cover | TPS (Tedilar -PET-Tediar) |
| Encapsulant | EVA (ethylene vinyl acelate) |
| Frame | Double-layers anodized aluminum alloy |
| Junction Box | IP65 |
| Cable/ connectors | 4.0mm2900mm/ MC4 or compatible connectors |
| Dimension | 1581mm*809mm*40mm(62.2''31.9''1.6') |
| Weight | 8.1kgs |
| Working Conditions |
| Max. series fuse | 10A |
| Working Temperature range | -400C-+850C |
| Storage temperature | -400C-+850C |
| Max. wind load/ Max. snow load | 2400Pa/ 5400Pa |
| Application class | Class A |
| Module Area | 0.68m2 |
| Container Loading Quantity | 608Pcs / 20ft GP |
| 1368/ 40ft GP |
| Electrical Parameters |
| Model | SKT100M |
| Peak Power(±3%) | 100W |
| Rated Voltage | 18.2V |
| Rated Current | 5.49A |
| Open Circuit Voltage | 22.4V |
| Short Circuit Current | 5.85A |
| Maximum System Voltage | 1000V,600V |
| Normal operating cell Temperature | 450C±20C |
| Temperature Coefficient Of ISC | 0.049%/0C |
| Temperature coefficient of Voc | -0.340%/0C |
| Temperature coefficient of Pmax | -0.430%/0C |
| Standard Test Conditions (STC) | Irrandiance 1000W/m2,Module temperature 250C,AM=1.5 |
| Power Production Tolerance | ±3% |
| Rated Battery Voltage | 24V |
| Rated Wind Turbine Power | 600W |
| Wind Turbine Maximum Input Power | 1000W |
| PV Power | 300W |
| Unload Voltage | 28V |
| Unload Current | 25A |
| Battery Over-discharge Voltage Shutoff | 22V |
| Battery Over-discharge Voltage Recovery | 24V |
| Output Protection Voltage | 32V |
| PV Voltage Of Light-Control On | 2V |
| PV Voltage Of Light-Control Off | 3V |
| Line 1 Rated Output Current | 10A |
| Line 2 Rated Output Current | 10A |
| Line 1 Output Mode(Factory Default) | 3 Modes selection(Light-control on and Light-control off) |
| Line 2 Output Mode(Factory Default) | 3 Modes selection(Light-control on and time-control 5 hours) |
| Control Mode | PWM |
| Display Mode | LCD |
| Quiescent Current | ≤20 mA |
| Working Temperature & Humidity | Ordinary:-20~+55ºC/35~85%RH(Without Condensation)
Industrial:-30~+55ºC/35~85%RH(Without Condensation) |
| Communication Function(Optional) | RS232,RS485,RJ45,GPRS |
| Temperature Compensation Function | -4mV/ºC/2V ,-35ºC--+80ºC,Precision:±1ºC |
| By-Pass Function (Optional) | Automatic Switch |
| Product Size(Wide×Deep×High) | 142×150×80mm |
| Product Weight(kG) | 1.9kg |
| Low-voltage charge fucntion : |
| Wind Turbine Starting Charge Voltage | 4V |
| Input Admittance | 1-10/30S |
| Line 1 Output Mode(Factory Default) | 7 Modes selection(Light-control on and Light-control off) |
| Line 2 Output Mode(Factory Default) | 7 Modes selection(Light-control on and time-control 5 hours) |
| Product Size(Wide×Deep×High) | 220×150×80mm |
| Product Weight(kG) | 2.8kg |
| In order to serve our customers better. Our company can adjust parameters configuration according to customer's requirement. |
·Timing Control Range:1min~168h ·timing error <±2s/day(25ºC±1ºC)
·Temperature:-10ºC~+50ºC · Relative Humidity:<95%
·Dimension:120×72×50mm · Weight:270g
Setting Method:Adjust Clock: Press the key "clock", meanwhile, press the key "hour" , "min" and "day" espectively to adjust hour , minute and day to accord with the current clock.Timer Setting:| Step | Key | Content |
| 1 | Press the key "prog". | Enter the first group of timing on (display 1ON) |
| 2 | Press the key "day". | Setting the day of switch-on time (everyday, 5-days, 6-days, everyday different etc.) |
| 3 | Press the key "hour" and "min". | Setting switch-off time (hour, minute) |
| 4 | Press the key "prog". | Enter the first group of timing off (display 1OFF) |
| 5 | Press the key " day ". | Setting the day of switch-off time (everyday, 5-days, 6-days, everyday different etc.). Pay attention that the day of switch-off time must correspond to the day of switch-on time. |
| 6 | Press the key "hour" and "min". | Setting switch-off time (hour, minute) |
| 7 | Repeat step 1 to 6 | Setting 2 to 16 groups of on-off time . If there is no need to set 16groups of on-off, press the key of " reset" to clear the rest groups of on-off time to "--:--"(but not 00:00) |
| 8 | Press the key "prog" repeatedly. | Check whether every group of on-off time is correct; press the key "reset" and repeat step 2 to 7 in case of error. |
| 9 | Press the key "auto/manu". | Adjust on-off signto the current state ("on" or "off") and adjust to the position of "auto". |
| 10 | Press the key "Clock". | End timing state and enter the state of clock display. |
| No. | Model | LED56 |
| 01 | Input voltage | 85-264Vac, 24Vdc |
| 02 | Working Frequency | 47-63 HZ |
| 03 | Power Factor | >0.9 |
| 04 | Total harmonic distortion | <20% |
| 05 | Power efficiency | >85% |
| 06 | Working mode choice | Constant temperature automatic, days control and saving, light control start |
| 07 | LED Power | 56W |
| 08 | Input Power | <63W |
| 09 | LED illume efficiency | ≥80lm/w |
| 10 | Total Luminous Flux | 4000lm( Ta=250C) |
| 11 | Continuous Luminous Flux | 3550lm(Tj= 700C, Ta=250C) |
| 12 | Lamp output luninous Flux | 3300lm(Tj= 700C, Ta=250C) |
| 13 | Lamp light efficiency (%) | >90% |
| 14 | Average illumination intensity grade (E) | (Height=8m)≥12 Lux ; (Height=10m)≥7 Lux |
| 15 | Illumination area distribution | 25*9m(Height=8m); 30* 10m(Height=10m) |
| 16 | Color temperature | White:5,000-7,000K; Warm white: 3,000-4,000K |
| 17 | Coloration index | Ra>75 |
| 18 | Lamp house | LED (1W) |
| 19 | Facula figure | Rectangle |
| 20 | LED Chip Temperature | 700C (Ta= 250C) |
| 21 | Working temperature | -300C-400C |
| 22 | Humidity | 10%-90%RH |
| 23 | Storage Temperature | 100C-850C |
| 24 | Working Life | >20,000 |
| 25 | Lamp material | Die-casting aluminum and PC |
| 26 | Weight | 7KG |
| 27 | Defend grade | IP65 |
Address:
A-2814. Wanda Plaza, Huishan District, Wuxi, China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Construction & Decoration, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components, Light Industry & Daily Use, Lights & Lighting, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Wuxi Ferra Mechanical & Electrical Technology (FME) Co., Ltd is a joint venture enterprises, which is located at Huishan Wanda Plaza in Wuxi China, it is one standard, professional & uniform institute for scientific research, manufacturing & trading of metallurgical machinery And we are highly successful in metal wire processing machinery such as straight line wire drawing machine, non-acid pickling pre-treatment machinery, finishing wire annealing and galvanizing machinery etc; As also actively coordinate with other group branch companies to commit to the development of renewable energy machinery, including wind turbines, wind & solar hybrid generation system, solar & wind street lighting project etc.
Being supported by well-known universities and industry research institutions, such as Northwestern Industry University, Shanghai Industry University, Shanghai wire & cable research institute, Zhengzhou Metal Research Institute etc, on technology innovation & good after-sale service, overall sell country amount for our machinery have been successfully installed in more than 60 countries in the world. That is include Germany, France, UK, Italy, Poland, Russia, USA, Canada, Puerto Rico, Peru, Mexico, Saudi Arabia, Iran, Egypt, India, Sri Lanka, Indonesia, Malaysia, Thailand, Vetinam, South Korea etc
){kind=link}